Parking Calls And Paging; Parking A Call; Retrieving A Parked Call; Two-Way Intercom Paging - Talkswitch TS-860i User Manual

PARKING CALLS AND PAGING

If you have direct line access enabled, you will automatically access an outside
line. To place an intercom call or to access features indicated with a
.

Parking a call

Parking a call is similar to placing a call on hold, but a user can retrieve a parked
call from any local extension.
1. During a call, press the Hold softkey.
2. Dial 510, and then press the Green Phone key. The system responds
with a parking orbit (500–509).
3. Page the user for whom the call is parked, and provide the parking orbit.

Retrieving a parked call

1. Dial
Phone key.

Two-way intercom paging

Two-way intercom paging connects your phone to the other extension's speaker,
and allows the other user to respond. The other phone must be a TalkSwitch
phone. Note that a TS-850i cannot receive a two-way intercom page.
1. In Idle mode, dial

One-way group paging

One-way group paging connects your phone to the speakers of the extensions
within a ring group, without allowing the other users to respond. It can also
connect your phone to one other extension. The other phones must be TalkSwitch
analog phones (TS-200, TS-400 or TS-600) or TalkSwitch IP phones (TS-350i, TS-
450i or TS-550i). Note that a TS-850i cannot receive a one-way group page.
1. In Idle mode, dial
Green Phone key.
E V E R Y C A L L C O U N T S
+ parking orbit (500–509), and then press the Green
84 + extension, and then press the Green Phone key.
85 + ring group (or extension), and then press the
, first dial
3 3