Telephone Lines > Detection And Timers - Talkswitch CT.TS005.003904 User Manual

1. Choose Troubleshooting > Telephone Lines > Audio. The Telephone Lines - Audio
window appears.
2. Calibrate the TalkSwitch unit to match the far end impedance of the telephone lines:
a) Click Calibrate Lines. The Calibrate Lines window appears.
b) Select the line(s) to calibrate, and then click Run Calibration.
For more information on calibration, see Line optimization on page 132.
3. For each telephone line, set the transmit level to callers. This affects the volume for remote
callers, not internal users. Choices are:
• Louder
• Default
• Quieter
CAUTION: Calibrating the telephone lines, and then overriding the outbound volume level can
degrade system performance.
Telephone Lines > Detection and Timers
The Telephone Lines > Detection and Timers command allows you to set telephone line
timers, and perform the ring pattern test.
T A L K S W I T C H C O N F I G U R A T I O N 185