Retrieve Settings; Close; Exit - Talkswitch CT.TS005.003904 User Manual

2. To save the configuration to the auto-discovered local TalkSwitch system, select the
TalkSwitch unit configured as proxy, and then click OK.
3. To save the configuration to a remote TalkSwitch system:
a) Click Other TalkSwitch. The Connect Via IP window appears.
b) Enter the URL / IP address of the remote TalkSwitch system, and then click OK. You can
also choose the TalkSwitch system from the address book.

Retrieve Settings

The Retrieve Settings command opens the configuration from the current TalkSwitch unit. You
can then modify the configuration using the TalkSwitch management software.
Alternatively, you can also click the Configure Auto-Detected TalkSwitch System button or
the Retry Auto Discovery button in the Configuration Selection page.

Close

The Close command closes the configuration, and returns to the Configuration Selection page.

Exit

The Exit command closes the TalkSwitch management software.
T A L K S W I T C H C O N F I G U R A T I O N 168