Telephone Lines; Activate Line - Talkswitch CT.TS005.003904 User Manual

For more information, see Caller ID Based Routing on page 137.
1. To enable caller ID name tagging of the entries within the System Speed Dials page, select
the Use the first and last names specified above to replace the incoming Caller ID names
check box.
2. Select the order for the names. Choices are First name followed by Last name, and Last name
followed by First name.

TELEPHONE LINES

The Telephone Lines page allows you to set up the telephone numbers, telephone company
services, and call handling for each telephone line. You can also calibrate the TalkSwitch unit to
match the telephone lines.
1. Select the Telephone Lines page.

Activate line

The Activate Line area allows you to activate a telephone line. All telephone lines are activated
by default.
"Line detected at initialization: Yes" appears if the telephone line was connected when you
started the TalkSwitch management software. "Line detected at initialization: No" appears if the
telephone line was not connected.
1. Select a telephone line.
2. If necessary, select the Activate line check box.
T A L K S W I T C H C O N F I G U R A T I O N 128