Table of Contents
Advertisement
2. If you set Location to External, select the Time zone of the external IP extension.
3. Use one of the procedures below to identify the IP phone, depending on the make
and model.
TalkSwitch TS-9112i, TS-9133i or TS-480i
1. Set the MAC address of the phone:
•
The MAC address will be complete, if you connected the phone to the LAN and used it to
select the extension number. See Connecting the TalkSwitch IP phone to the network on
page 82.
•
You can enter the MAC address manually. The MAC address is printed on the bottom of
the phone and on the phone's shipping box.
•
You can select the MAC address using the MAC Selection window. This method is
available if you connected the phone to the LAN. It is also available if you programmed
the phone as an external IP extension (see Programming the TalkSwitch IP phone as an
external IP extension on page 89). To use the MAC Selection window:
i) Click Select. The MAC Selection window appears and lists TalkSwitch IP phones of
the selected type. If a phone has already been assigned to an extension, Ext
Assignment shows the extension number, first name and last name. If a phone can be
assigned to the extension, Ext Assignment shows Available.
ii) Select an available IP phone for the extension, and then click Select.
2. If the Type of phone is TalkSwitch TS-9133i or TS-480i, click Configure Keys to set up the
programmable keys. See Programming TS-9133i function keys on page 86 or Programming TS-
480i softkeys on page 87.
TalkSwitch TS-850i
1. Set the MAC address of the phone.
•
You can enter the MAC address manually. This is required if you are setting up an
external IP extension. The MAC address is printed under the base associated with
the handset.
•
You can select the MAC address using the MAC Selection window, if you connected the
base to the LAN. To use the MAC Selection window:
T A L K S W I T C H C O N F I G U R A T I O N
61
Advertisement
Table of Contents
Troubleshooting
