Options Menu; Pa Output - Talkswitch CT.TS005.003904 User Manual

1. Choose Tools > Reboot TalkSwitch. The Reboot System window appears.
2. Select when the TalkSwitch units should reboot. They can reboot immediately, when all calls
are complete, once the system has been unused for a period of time, or once a certain
time arrives.
3. Click Reboot.

OPTIONS MENU

The Options menu has commands for configuring the system.

PA Output

The PA Output command allows you to set the audio from the PA jack.
1. Choose Options > PA Output. The Audio Control Options window appears.
2. Select the audio that is output from the PA jack. Choices are:
• PA announcements — Routes a PA announcement to the PA jack when a user dials *0.
If a user has dialed *80 to route music on hold through the PA jack, and a user dials *0
to make a PA announcement, the PA announcement will interrupt the music on hold.
• Voicemail screening — Routes a call to the PA jack if a caller reaches a voice mailbox, or
if a user accesses a voice mailbox. In addition, the system will route a PA announcement
to the PA jack if a user dials *0.
NOTE: Unlike a PA announcement, voicemail screening will not interrupt music on hold.
• Demo with router — Intended for TalkSwitch demonstration purposes only.
• Static VoIP demo — Intended for TalkSwitch demonstration purposes only.
T A L K S W I T C H C O N F I G U R A T I O N 174