Select Location For Installation; Wiring - Talkswitch CT.TS005.003904 User Manual

SELECT LOCATION FOR INSTALLATION

Select a suitable location for installation of TalkSwitch.
TalkSwitch can be installed on a desktop or mounted on a wall. It can be installed in a office or
communications or utility room.
Choose a location that meets the following requirements:
• Ambient temperature between 0–35°C.
• Away from heat sources and direct sun light.
• Avoid rooms with excessive humidity or dust.
• Within 1.5m of a power socket.
• Close to telephone company demarcation point for telephone lines, or sockets, and any in-
building telephone wiring connection point.
• Away from any electronic devices that emit radio signals.
• Away from hazardous or explosive materials.
When installing multiple TalkSwitch units, do not stack units on top of each other.
If TalkSwitch has been exposed to low temperatures prior to installation, wait until the system
has reached room temperature before connecting the power cord to avoid damage due
to condensation.
Caution: Use only the power adapter and power cord supplied with your TalkSwitch. Check
the supply voltage matches the rating on the power adapter label. If your supply voltage does
not match the power adapter rating, please consult your reseller. For safe operation, the
TalkSwitch power adapter must be connected to a power supply socket with a third pin
(ground/earth).
Caution: Surge protection devices are recommended to protect TalkSwitch in areas subject to
lightning or power surges. Please consult your reseller for recommended surge
protection devices.

Wiring

Make the most of your phone system with optimal home/office wiring. If you need help wiring
your house or small office and are not sure where all the jacks are or what colors of wires to use,
refer to Appendix H: Home/Office Wiring Guide on page 268.
Figure 6: An example of residential wiring
T A L K S W I T C H I N S T A L L A T I O N 9