Unit Front Panel; What The Flashing Lights Mean; Line 1, 2, 3 And 4 Lights Flashing Simultaneously; Power/Data And Line 1, 2, 3 And 4 Lights Flashing Simultaneously - Talkswitch CT.TS005.003904 User Manual

UNIT FRONT PANEL

The front panel consists of a power button, four line lights, and the power/data light.
Figure 1: Front panel
Light State
Line 1 to Line 4 On
Flickering
Pulsing slowly
Pulsing quickly
Power/Data On
Flickering
Pulsing slowly
TalkSwitch models with eight telephone lines do not have lights for Lines 5 to 8.

What the flashing lights mean

The TalkSwitch unit flashes the lights on the front panel in different patterns to show
diagnostic states.

Line 1, 2, 3 and 4 lights flashing simultaneously

The unit ID of this unit is in conflict with another unit on the same LAN.
1. Assign a different unit ID to each unit. For more information, see Setting or changing the
unit ID on page 17.

Power/Data and Line 1, 2, 3 and 4 lights flashing simultaneously

The boot block is functioning, but the firmware needs to be updated or reloaded. Ensure you
update the firmware with the latest version. Do not use the version on the installation CD,
because there might be a newer version.
1. Choose Tools > Update Firmware.

Line 1 and 4 lights, then Line 2 and 3 lights flashing alternately

The prompts are corrupted or not loaded. Ensure you update the firmware with the latest
version. Do not use the version on the installation CD, because there might be a newer version.
1. Choose Tools > Update Firmware.
T A L K S W I T C H I N S T A L L A T I O N
Description
Line is in use.
Line is ringing.
Line caller is on hold.
Line is engaged by a device that is sharing the line
with TalkSwitch.
TalkSwitch is powered on.
The TalkSwitch unit is exchanging data with the
computer via USB.
A voicemail message has been left in one of the
mailboxes. This indicator is disabled by default, but
can be enabled.
2