Personalizing Your Phone; Entering Values With The Dial Pad And Softkeys; Setting A Hunt Group As An Access Code Prefix - Talkswitch TS-350i Start Manual

PERSONALIZING YOUR PHONE

To access the configuration menu:
• Press the
To select an item:
• Dial the digit associated with the menu item or
• Use the Down softkey to move the cursor to the next item, then press the Select
softkey to select an option.
The bottom line of the display shows three (3) softkey functions at a time. Additional
softkey functions are available when the More softkey appears.
To return to a previous branch in the menu, press the Back softkey, or the
To exit the configuration menu, press the

Entering Values with the Dial Pad and Softkeys

Use the dial pad to input numbers, letters, special characters, and a period. The Mode
softkey displays to indicate a parameter can accept an alphanumeric entry. Selecting the
Mode softkey switches the dial pad mode. The dial pad mode displays in the right of the
LCD above the softkeys as
case characters and
To enter characters with the dial pad, use the digit with the desired character. Press the
same digit repeatedly until the desired character appears in the LCD. After entering a
character, pause to allow the cursor to move to next character position.
Other special entries include:
• To enter a period or dot (for example, to input an IP address), press * on the dial pad.
• To delete a letter in front of the cursor, press the
• To clear an entire string, press the Clear softkey.
• To enter a space, press # on the dial pad.
Prior to saving an entry, you may discard changes by pressing the
the previous menu, or press the

Setting a Hunt Group as an Access Code Prefix

If you need to dial 9 or 81–88 to access an outside line, then you will want to program
your phone to automatically insert a hunt group number before all calls placed from the
Missed and Received call logs as well as from the Phone Book.
To set an Access Code:
• Press the
• Press 4 to enter the Call Preferences menu.
• Press 8 to enter the Access Code Prefix menu.
• Enter the hunt group you normally use to place outgoing calls (example: 9), then press
the OK softkey.
8
button.
for numeric,
for special characters.
button.
button.
for upper case characters,
button to exit the Settings menu.
softkey.
button to move to
T S - 3 5 0 i S T A R T G U I D E
button.
for lower