Connecting A Two-Line Analog Phone - Talkswitch CT.TS005.003904 User Manual

Each phone is connected to an extension jack. Calls on extension 111 ring the phone connected
to jack E1. Calls on extension 112 ring the phone connected to jack E2 and so on.
Figure 8: Single-line phones

Connecting a two-line analog phone

You can plug a two-line phone into two extension jacks of the TalkSwitch unit. You can then
configure each telephone line to ring a specific extension. For example, line 1 can ring
extension 111, which will show Line 1 as active. Line 2 can ring extension 112, which will show
Line 2 as active and so on.
Figure 9 shows extensions 111 and 112 connected to a two-line phone that uses separate jacks
for each line.
Figure 9: Two-line phone
If your two-line phone does not have separate jacks, you can use a splitter to join the two lines
as shown in Figure 10.
Figure 10: Two-line phone on splitter
T A L K S W I T C H I N S T A L L A T I O N 12