Adding Counterpath Ip Phones; Adding The Extension To The Talkswitch System; Activate Extension Area - Talkswitch CT.TS005.003904 User Manual

6. Set Firmware Server Path to the IP address of the PC running the TFTP server.
7. Scroll to the bottom of the page and click the Update button to save the settings.
8. On the following screen, click the Reboot button to apply the settings.

ADDING COUNTERPATH IP PHONES

Adding the extension to the TalkSwitch system

1. Launch the TalkSwitch management software.
2. Select the Local Extension/Fax page.
3. Select the Extension tab.
4. Select an available extension number.

Activate extension area

1. Select the Activate Extension check box.
2. Set the Extension type to IP extension.
3. Enter the user's First name and Last name. The names are used for caller ID, and appear
within other pages of the TalkSwitch management software. The Last name is used with the
dial-by-name directory.
4. Select Counterpath as the Type of phone, and then select Counterpath Eyebeam.
5. Select the language for prompts heard by the user of the extension in the System prompt
language list.
6. Click the Additional Settings button to set up:
• Direct line access (see Direct line access on page 62)
• Hunt group permissions (see Hunt group permissions on page 65)
• Caller ID settings (see Caller ID settings on page 66)
T A L K S W I T C H C O N F I G U R A T I O N 106