Talkswitch Sip Client Profile; Service Provider Profile - Talkswitch CT.TS005.003904 User Manual

a) Choose Options > VoIP Trunking. The VoIP Settings window appears.
b) Select the Re-registration interval.
c) Enter the SIP signalling port.
d) Enter the Starting RTP port.
e) Ensure the router is set up to perform port forwarding for the SIP signalling and RTP
ports. See Router port forwarding on page 36.

TalkSwitch SIP client profile

If the SIP server is at another location, the Registration Details area allows you to enter the
Proxy/registrar server name.
1. Leave the This TalkSwitch location is the proxy/registrar check box cleared. The page disables
the Registrar authentication list and the View Registrar Entries button.
2. Enter the Current public IP address or Fully qualified domain name (FQDN) of the SIP server
into the Proxy/registrar server name box.
3. If the SIP server requires a non-default SIP signalling port (i.e. if the SIP server cannot use
5060 as the SIP signalling port), specify the port number after a colon at the end of the
public IP address or FQDN (e.g. 123.45.67.89:3456).
4. Ensure the router is set up to perform port forwarding for the SIP signalling port. See Router
port forwarding on page 36.

Service provider profile

If setting up a service provider profile, the Registration Details area allows you to enter the
proxy server name, registrar server name, outbound proxy, and realm/domain, as provided by
the service provider.
1. Enter the IP addresses or FQDNs, as provided by the service provider, into the following
boxes. If the service provider does not specify a value, leave the box blank.
• Proxy server name
• Registrar server name
• Outbound proxy
• Realm/domain
For information on entering the registration details, see the service configuration guide for
your VoIP service provider.
T A L K S W I T C H C O N F I G U R A T I O N 51