Talkswitch CT.TS005.003904 User Manual page 242

2. If required, click the Manual Port Mapping Required link. The Manual Port Mapping
window appears. It lists the packet type, port number, IP address and protocol of each
required port.
3. To access the router configuration:
a) Click the link containing the IP address of the gateway. The default browser starts, and
prompts you for the router's user name and password.
b) Enter the router's user name and password. The browser shows a setup screen.
c) Navigate to the screen used to set up port forwarding. See your router documentation.
d) Set up port forwarding using the information from the Manual Port Mapping window.
See your router documentation for instructions on how to map ports. For information on
configuring routers and mapping ports, visit http://www.portforward.com/english/
routers/port_forwarding/routerindex.htm.
4. To check the status of each port through the firewall, click Check Firewall. The Test
Firewall window appears.
5. Select the services you want to check.
6. Click Test Ports. The system will check the ports for the selected services.
V O I P I N F O R M A T I O N 223