Confirming The Polycom Firmware Version; Programming The Polycom Ip Phone; Updating The Polycom Firmware; Installing A Tftp Application - Talkswitch CT.TS005.003904 User Manual

Confirming the Polycom firmware version

The TalkSwitch system requires the IP phone to have a specific firmware version.
1. Check the required firmware version in the support section at http://
global.talkswitch.com.
2. Confirm the firmware version currently installed the IP phone. On the phone:
a) Press the Menu key and select Status > Platform > Application > Main.
b) Compare Version to the required firmware version. If the firmware version is the same,
proceed to Programming the Polycom IP phone on page 100. If not, follow the
instructions in Updating the Polycom firmware on page 100.

Programming the Polycom IP phone

The TalkSwitch system automatically configures the necessary parameters required for the
proper operation of the Polycom phone with TalkSwitch. On the phone:
1. Press the Menu key and select Settings > Advanced.
2. Enter the password, and then press the Enter key. By default this is 456. When the
TalkSwitch unit configures the phone, it changes the password to 23646 (which spells
"admin" on the telephone keypad).
3. Select Admin Settings > Network Configuration.
4. Select Server Menu and change ServerType to TrivialFTP.
5. Select Server Address and press the Edit key. Press the 1/A/a key. If you are setting up an
internal IP extension, enter the IP address of the TalkSwitch unit acting as local proxy. If
you are setting up an external IP extension, enter the public IP address or FQDN of the
TalkSwitch system. Use the * key to enter decimal points.
6. Press the Exit button three times. Advanced appears at the top of the menu.
7. Select Restart Phone and confirm by selecting Yes.
The phone connects to the TalkSwitch local proxy and downloads the configuration file. If the
configuration is successful, the phone will reboot and show the time, date and extension
number. To ensure full functionality, dial another extension and check the audio transmission in
both directions.

Updating the Polycom firmware

This procedure is only required if you need to update the Polycom firmware. To update
the firmware:
• Install a TFTP application.
• Download and extract firmware files.
• Configure the phone to point to the firmware files.
T A L K S W I T C H C O N F I G U R A T I O N 100