Line 1 and 3 lights, then Line 2 and 4 lights flashing alternately
The firmware and prompts have been updated, and the TalkSwitch unit needs to reboot.
1. Choose Tools > Reboot TalkSwitch or, on the front panel, turn the power button off and
back on.
Line 2 and 3 lights flashing simultaneously
File system error. The stored greetings, music on hold, and voicemail messages may have
exceeded the memory capacity of the TalkSwitch unit.
1. Choose Tools > Memory Usage. The Memory Usage window appears.
2. Check the Time Usage Summary area.
3. If the stored greetings, music on hold, and voicemail messages have exceeded the memory
capacity, delete unnecessary files.
4. Choose Tools > Reboot TalkSwitch. The Reboot System window appears.
5. Select Lock down system and reboot when all calls are complete.
6. Click Reboot. The TalkSwitch system will reboot when all calls have been completed.
Line 1 and 4 lights flashing simultaneously
Voice mailbox error.
1. Choose Tools > Reboot TalkSwitch or, on the front panel, turn the power button off and
back on.
Power/Data and Line 1, 2, 3 and 4 lights on steady
The boot block is corrupt.
1. Contact the Technical Support department at TalkSwitch.
T A L K S W I T C H I N S T A L L A T I O N
3