Table of Contents
Advertisement
Authentication
TalkSwitch SIP server profile
If the SIP server is at this location, the Authentication area allows you to set registrar
authentication, and enter the user/account name and password for the TalkSwitch VoIP
network. All TalkSwitch locations must use the user/account name and password from the
SIP server.
1. Set Registrar authentication to Yes (digest). This restricts access and allows only authorized
devices to connect.
Devices will require digest authentication to access the VoIP network. Digest authentication
is a challenge/response protocol in which the server challenges the client, and the client
responds by presenting its credentials. This method of authentication is very secure.
2. Enter the User/account name. All SIP clients must use this name.
3. Enter the Password. All SIP clients must use this password.
TalkSwitch SIP client profile
If the SIP server is at another location, the Authentication area allows you to enter the user/
account name and password from the SIP server. The Registrar authentication list is disabled.
1. Enter the User/Account name from the SIP server. All SIP clients must use this name.
2. Enter the Password from the SIP server. All SIP clients must use this password.
Service provider profile
If setting up a service provider profile, enter the authentication information for each VoIP
number in the Username and Password area of the VoIP Numbers page.
VoIP caller ID
The VoIP Caller ID area allows you to set up the source for the caller ID name for outbound VoIP
calls. The same setting is used for the TalkSwitch profile and all service provider profiles.
Extension names are used by default.
1. Set the caller ID information for outgoing VoIP calls:
•
To use the System name from the Administration page, select Use system name in caller
ID information for all outgoing VoIP calls.
•
To use the First name and Last name from the Local Extensions/Fax page, select Use
extension names in caller ID information for all outgoing VoIP calls.
See Caller ID settings on page 66 to select the phone number that will appear on the
other phone.
T A L K S W I T C H C O N F I G U R A T I O N
52
Advertisement
Table of Contents
Troubleshooting
