Voip Configuration; Setting Up A Talkswitch Profile - Talkswitch CT.TS005.003904 User Manual

VOIP CONFIGURATION

The VoIP Configuration page allows you to set up the TalkSwitch profile for the SIP server or a
SIP client, and up to four service provider profiles. You can also view registrar entries, view
registration status, set codec options, and reserve VoIP lines for specific setups.
The VoIP Configuration page is only present with a VoIP-enabled TalkSwitch unit. The layout of
the page depends on whether you are configuring a TalkSwitch profile or a service
provider profile.

Setting up a TalkSwitch profile

You can set up a TalkSwitch profile for the SIP server or for a SIP client. The TalkSwitch profile
contains registration details and authentication information. The information is from the
TalkSwitch unit acting as the SIP server for a TalkSwitch VoIP network.
Any VoIP-enabled TalkSwitch unit can act as the SIP server. However a TalkSwitch VoIP network
requires that one (and only one) TalkSwitch unit be configured to act as the SIP server.
TalkSwitch systems at other locations are configured as SIP clients.
When the SIP server is enabled and SIP clients are registered with the SIP server, all VoIP calls
within the TalkSwitch VoIP network contact the SIP server to resolve the destination location.
Once the destination is resolved, the call goes directly from the source to the destination.
1. Select the VoIP Configuration page.
2. Select Profile TS, which is for configuring the TalkSwitch profile.
T A L K S W I T C H C O N F I G U R A T I O N 48