Connecting An Ip Phone; Connecting A Modem - Talkswitch CT.TS005.003904 User Manual

A four-line phone can use two splitters to join the four lines as shown in Figure 11.
Figure 11: Four-line phone on two splitters

Connecting an IP phone

Plug the IP phone into your switch/hub and configure it as described in Adding IP phoneS on
page 82. If you are using an unsupported IP phone, refer to its user guide for
configuration instructions.

Connecting a modem

Plug the modem's telephone cable into a unit extension jack. Your modem is now an extension
that can access all lines and take advantage of call routing features.
A modem connected to a TalkSwitch unit operates at up to 28 kbps.
If you don't want to change your dial-up settings for the modem, enable Direct Line Access for
the extension associated to the modem. For more information, see Direct line access on page 62.
T A L K S W I T C H I N S T A L L A T I O N 13