Table of Contents
Advertisement
ADVANCED VOIP CONFIGURATION
Optionally, perform advanced VoIP configuration.
Setting up caller ID
The VoIP Caller ID area allows you to set up the source for caller ID for outbound VoIP calls. The
same setting is used for the TalkSwitch profile and all service provider profiles. Extension names
are used by default.
1. Select the VoIP Configuration page.
2. Set the caller ID for outbound VoIP calls.
•
To use the System name from the Administration page, select Use System Name in caller
ID information for all outgoing VoIP calls.
•
To use the First name and Last name from the Local Extension/Fax page set up for each
extension, select Use Extension Names in caller ID information for all outgoing VoIP calls.
Reserving VoIP lines
By default, all TalkSwitch VoIP lines are available for external IP extensions, TalkSwitch VoIP
network calls, and/or service provider calls on a first-come first-served basis. You can also
reserve VoIP lines for a specific use. For example, you can set aside two lines for external
IP extensions.
Reserving VoIP lines guarantees resources for a specific network. Sharing VoIP lines uses them
most efficiently.
1. Select the VoIP Configuration page.
2. Click Reserve VoIP Lines. The VoIP Resource Reservation window appears.
V O I P I N F O R M A T I O N
236
Advertisement
Table of Contents
Troubleshooting
