Setting Up Your Ts-600 Phone; Configure The Outside Line Access Code; Extensions With Direct Line Access; To Enter Outside Line Access Code - Talkswitch TS-600 User Manual

SETTING UP YOUR TS-600 PHONE

MENU
1. Press the
The menu screen will be displayed.
2. You can use the
the selection indicator up or down, and press the
DIAL/ENTER
button to select an option. Alternatively,
you can just press a digit to select the corresponding option.
3. If you made a mistake during telephone set up procedures, press the
button. Set up procedure is terminated and the idle state screen will be displayed.

CONFIGURE THE OUTSIDE LINE ACCESS CODE

The outside line access code is dialled prior to any number
over 6 digits stored in the directory, speed dial buttons,
or the call log. A stored number with 6 or fewer digits is
considered an internal number. The outside line access code
is not dialled for an internal call. A 3 second pause is inserted
automatically between the outside line access code and the phone number.

EXTENSIONS WITH DIRECT LINE ACCESS

Direct Line Access allows you to access the outside phone lines directly, without having
to enter a line access code. If your TalkSwitch extension is programmed for Direct Line
#
Access, enter as your line access code. This will ensure that features and dialling
operate properly for your extension. Refer to your TalkSwitch programming guide for
more information.

To enter outside line access code

MENU
1. Press the
2. Enter your outside line access code or
Line Access.
SAVE
3. Press the
H T T P : / / G LO B A L .T A L K S W I T C H . C O M
button to configure the phone.
button or the button to move
button followed by
button to store the access code.
2
.
#
if your extension is configured for Direct
T S - 6 0 0 U S E R G U I D E
MENU
Use / Enter To Select
1 = Enter access code
2 = Select ring tone
3 = Select flash duration
GOODBYE
Use Save to End
9
# = DLA Mode Enable
Enter Access Code
5