Installing The Ts-850I/Ts-860I; Installing The Base - Talkswitch TS-860i User Manual

INSTALLING THE TS-850i/TS-860i

Installing the base

1. Place the base near a wired Ethernet
router, either on a tabletop or
mounted on a wall. Avoid placing
the base in a location with a lot of
metal, or near devices that
cause interference.
2. Connect the Ethernet cable from the
WAN port on the base to a LAN port
on your router or Ethernet switch.
The TalkSwitch unit must be
connected to the same LAN.
3. Optionally connect the telephone
cable from the Line port on the base
to the telephone wall socket. This
will allow you to use the TS-850i/
TS-860i with a traditional phone
line.
4. Connect the power adapter from the
power outlet to the power supply
connector. Use a continuous power
outlet without a switch, which
provides uninterrupted power. We
recommend using an AC surge
arrester in the power outlet. This is
to avoid damage to the equipment
caused by lightning and other
electrical surges.
Only use the power supply included
with the product. Using an unauthorized power supply will invalidate the
product warranty and may damage the telephone.
E V E R Y C A L L C O U N T S 7