Installing The Ts-350I; Connecting The Ip Phone - Talkswitch TS-350i User Manual

INSTALLING THE TS-350i

CONNECTING THE IP PHONE

The figure below shows the cable connections for your IP phone. The LAN and desktop PC connections
employ standard Category 5 cables terminated with RJ-45 connectors. The TS-350i supports PoE (Power
over Ethernet) in accordance with the IEEE-802.1af Class 2 standard. When connected to a PoE compliant
LAN port, the IP Phone derives power from the port. If the LAN port does not support PoE, use the AC/DC
adapter (sold seperately). The handset connects to the base with the coiled handset cord.
Figure 2: IP Phone Connections
Wiring Chart
Connect the IP phone LAN port to the LAN wall jack with the provided Ethernet cable.
1 LAN
2 PC Optionally connect the IP phone PC port to your desktop PC with an Ethernet cable
(not supplied).
3 Power If the LAN port supports PoE then the power adapter is not required. If PoE is not supported on
the LAN, connect the power adapter to the power jack on phone.
4 T S - 3 5 0 i U S E R G U I D E