Plugging Into The Back Panel; Attaching Telephone Lines To Talkswitch Line Jacks - Talkswitch DESKTOP PHONE SYSTEM User Manual

U S B
SERIAL
M E M O R Y SLOT
P O W E R
By default, TalkSwitch is set to Serial connection. To activate USB connection, dial
91 from an extension then reset TalkSwitch. To return to Serial connection, dial
90 and reset TalkSwitch.
The 'PF' box in between E4 and L1/L2 represents power failure support. In the event
of a power failure or loss of power to the TalkSwitch, Extension 4 will be able to receive
calls and make calls on Line 1.
1.4

Plugging into the Back Panel

1.4.1 Attaching telephone lines to TalkSwitch line jacks

You can connect your telephone lines from the wall jack(s) to the TalkSwitch Line
jacks with the phone cables provided. Take note of which telephone line is connected
to which Tel Line number - this information will be used in the configuration
section.
TalkSwitch works with many telephone company services such as 3-Way Calling and
Distinctive Ring. For more information on phone company services, see Appendix B.
1.0
Use the USB port if your PC supports USB connectivity. If
you use the USB port, you cannot use the serial port
simultaneously.
This is where you attach the supplied serial cable
(RS232) that connects TalkSwitch to your PC. If you use
the serial port, you cannot use the USB port simultane-
ously.
Memory expansion slot. Used to expand internal memo-
r y f o r v o i c e m a i l a n d A u t o A t t e n d a n t m e s s a g e s .
TalkSwitch Memory cards can be purchased from your
reseller or from Centrepoint Technologies.
Plug the supplied AC Power Adapter in here.
Installing TalkSwitch 5