CONFIGURING THE TS-850i AS AN
IP EXTENSION
After following the procedures described in Installing the TS-850i on page 7,
configure your phone as an IP extension. The phone can be located within the
office, or outside the office (i.e. an external IP extension).
Before configuring a phone, ensure that no handsets registered with the
associated base are being used. If a handset is on a call, the call will be
terminated when the system resets the base during configuration of the phone.
NOTE: The TS-850i requires version 6.11 or greater of the TalkSwitch management
software, which is available at http://global.talkswitch.com.
Configuring the TS-850i for use within the office
If the TS-850i is located within the office, it connects to your TalkSwitch system
over the local area network (LAN).
1. Launch the TalkSwitch management software.
2. Select the Local Extensions/Fax page.
3. Select an available extension number.
Activate extension area
1. Ensure the Activate extension check box is selected.
2. Set the Extension type to IP extension.
3. Enter the user's First name and Last name. The names are used for caller ID,
and appear within other pages of the TalkSwitch management software. The
Last name is used with the dial-by-name directory.
E V E R Y C A L L C O U N T S
1 3