Validating Zoning Configuration; Restoring Typical Zoning - Brocade Communications Systems Brocade 300 Administrator's Manual

FIGURE 43

Validating zoning configuration

You can validate the current zoning configuration against the following rules:
•
•
•
If offline devices are in the current zoning setup, you are prompted you to delete those devices from
the zoning database.
1. Click Validate under Zoning in the task panel.
2. Follow the instructions in the wizard.
3. Note any devices that are not zoned properly and, after exiting the wizard, and click Edit to

Restoring Typical Zoning

If you have modified your zoning configuration and want to reset the configuration back to the
default Typical zoning configuration, use the following procedure.
1. Click Restore Default Typical Zoning under Zoning in the task panel.
2. Click Yes in the confirmation window.
EZSwitchSetup Administrator's Guide
53-1002744-01
Zoning summary information
Every HBA has access to at least one storage device.
Every storage device is accessible by at least one HBA.
No offline devices exist in the zoning configuration.
The Validate Zoning wizard launches.
update the zone configuration.
When this task is complete, the matrix in the Zoning page is automatically updated to reflect
the changes.
Zoning management
3
47