20
Restoring a master key from a key vault
Restoring a master key from a key vault
Use the following procedure to restore the master key from a key vault.
1. Select Configure > Encryption from the menu bar.
2. Select an encryption group from the tree, and click Properties.
3. Select the Security tab.
4. Select Restore Master Key as the Master Key Action.
FIGURE 253
5. Choose the active or alternate master key for restoration, as appropriate. Refer to
6. Select Key Vault as the Restore From location.
7.
8. Enter the passphrase. The passphrase that was used to back up the master key must be used
9. Click OK.
566
The Encryption Center dialog box displays.
The Restore Master Key for Encryption Group dialog box displays.
Select a Master Key to Restore (from key vault) dialog box
master key"
on page 559 and
information on active and alternate master keys.
Enter the key ID of the master key that was backed up to the key vault.
to restore the master key.
"Alternate master key"
on page 559 if you need more
"Active
DCFM Enterprise User Manual
53-1001775-01