Restoring A Master Key From A Key Vault - Brocade Communications Systems WFT-2D User Manual

FIGURE 398
4. Choose the active or alternate master key for restoration, as appropriate.
5. Select File as the Restore From location.
6. Enter a file name, or browse to the desired location.
7.
8. Click OK.

Restoring a master key from a key vault

Use the following procedure to restore the master key from a key vault:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Restore Master Key as the Master Key Action.
Brocade Network Advisor SAN User Manual
53-1003154-01
Restore Master Key for Encryption Group dialog box - Restore from file
Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
dialog box. (Refer to Figure 266
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Restore Master Key for Encryption Group dialog box displays. (Refer to
on page 694.)
20
Master keys
Figure 399.)
847