Finding A Member In One Or More Zones; Finding A Zone Member In The Potential Member List - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual
Supporting dcfm 10.4.x
Hide thumbs
Also See for Brocade BladeSystem 4/24:
- User manual (830 pages) ,
- Command reference manual (894 pages) ,
- Documentation update (271 pages)
Table of Contents
Advertisement
22
Finding a member in one or more zones
Finding a member in one or more zones
Use this procedure to locate all instances of a member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. If you want to show all fabrics discovered in the Potential Members list, right-click in the
5. Select the device or port you want to find in the Potential Members list.
6. Click Find > between the Potential Members list and Zones list.
Finding a zone member in the potential member list
Use this procedure to locate a zone member in the Potential Members list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select the zone member in the Zones list that you want to find in the Potential Members list.
5. Click Find < between the Potential Members list and the Zones list.
646
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Potential Members list and select Display All.
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the member is found, all instances of the zone member found are highlighted in the
Zones list.
•
If the member is not found, a message displays informing you of this. Click OK to close the
message box.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the member is found, it is highlighted in the Potential Members list.
•
If the member is not found, a message displays informing you of this. Click OK to close the
message box.
•
If there are no ports listed in the Potential Members list, a message displays informing you
that additional action is required. Right-click within the list panel and select Port Display
from the shortcut menu to display ports.
DCFM Enterprise User Manual
53-1001775-01
Advertisement
Chapters
Table of Contents
Troubleshooting
