Cassette Pickup Solenoid; Before Removing The Cassette Pickup Solenoid; Removing The Cassette Pickup Solenoid - Canon iR C1020 Series Service Manual

9) Remove the pickup motor [1].
- 2 screws [2]

9.5.4 Cassette Pickup Solenoid

9.5.4.1 Before Removing the Cassette Pickup Solenoid

1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 10-6)Reference [Removing the Fix-
ing Assembly]
3) Remove the rear cover unit.(page 11-11)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 5-8)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 11-13)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 11-11)Reference [Removing the Right
Cover]
7) Remove the Control Panel Unit.(page 11-20)Reference [Removing the
Control Panel Unit]
8) Remove the Front Upper Cover 1.(page 11-10)Reference [Removing
Front Upper Cover 1]
9) Remove the Front Cover Unit.(page 11-9)Reference [Removing the
Front Cover Unit]
10) Remove the Pickup Feed Unit.(page 9-18)Reference [Removing the
Pickup Feed Unit]

9.5.4.2 Removing the Cassette Pickup Solenoid

1) Remove the right arm cover [1].
- 4 claws [2]
F-9-36
0018-9293
2) Remove the cassette guide [1].
- 1 claw [2]
0018-9294
3) Remove the right hinge [1].
- 1 screw [2]
4) Fit the link [1] with the cutoff of the shaft [2] to remove the link.
Chapter 9
[1]
[2]
F-9-37
F-9-38
F-9-39
9-21