Slide Resistor; Before Removing Slide Resistor; Removing Slide Resistor; Cassette Pickup Solenoid - Canon iR C2880 Series Service Manual

Chapter 8

8.11.13 Slide Resistor

8.11.13.1 Before Removing Slide Resistor

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the rear right cover. (page 10-15)[Detaching the Rear Right
Cover]
2) Open the right cover fully (to the point where it does not interfere with oth-
er parts). (page 10-36)[Opening/Detaching the Right Cover]
3) Remove the manual feed unit. (page 8-47)[Removing Manual Feed
Unit]
4) Remove the manual feed tray unit. (page 8-47)[Removing Manual Feed
Tray Unit]

8.11.13.2 Removing Slide Resistor

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the manual feed tray upper cover [2].
- 2 screws [1]
MEMO:
It is better to put a mark to the side registration position before the removal.
F-8-78
2) Remove the slide resistor [1].
- 1 connector [2]
F-8-79

8.11.14 Cassette Pickup Solenoid

8.11.14.1 Before Removing Cassette Pickup Solenoid

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the rear right cover. (page 10-15)[Detaching the Rear Right
Cover]
2) Detach the right cover. (page 10-36)[Opening/Detaching the Right Cov-
er]
3) Detach the right lower cover. (page 10-14)[Detaching the Right Lower
Cover]
4) Remove the cassette pickup unit 2. (page 8-40)[Removing the Cassette
Pickup Unit 2]
5) Remove the cassette pickup unit 1. (page 8-40)[Removing the Cassette
Pickup Unit 1]

8.11.14.2 Removing Cassette Pickup Solenoid

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
8-46
1) Remove the cassette pickup solenoid [1].
- 1 wire saddle [2]
- 1 connector [3]
- 1 screw [4]
0014-1176
0014-1178
Points to note when attaching
When attaching the cassette pickup solenoid [1], make sure to engage the
stop plate [2] with the cam gear [3] fully.

8.11.15 Cassette Size Sensor Relay PCB

8.11.15.1 Before Removing Cassette Size Sensor PCB

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the rear right cover. (page 10-15)[Detaching the Rear Right
Cover]
2) Detach the right cover. (page 10-36)[Opening/Detaching the Right Cov-
er]
3) Detach the right lower cover. (page 10-14)[Detaching the Right Lower
Cover]
4) Remove the cassette pickup unit 2. (page 8-40)[Removing the Cassette
Pickup Unit 2]
5) Remove the cassette pickup unit 1. (page 8-40)[Removing the Cassette
0014-1183
Pickup Unit 1]

8.11.15.2 Removing Cassette Size Sensor PCB

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i
1) Detach the mount cover [1] (snap stopper).
0014-1188
[4] [3]
[1] [2]
F-8-80
F-8-81
0014-1259
0014-1260