Removing The Manual Feed Pickup Roller - Canon iR4570 Series Service Manual

F-8-311
8.8.16.5 Removing the Manual
Feed Pickup Roller
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the manual feed upper cover [1] (snap-on).
F-8-312
2) Remove the bush [2], and detach the manual feed
pickup roller [3] together with the shaft.
3) Remove the plastic E-ring [4], and detach the
manual feed pickup roller from shaft. Take care not
to drop the parallel pin.
F-8-313
8.8.17 Manual Pick-up Clutch
0007-6713
8.8.17.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
8.8.17.2 Removing the Right
Door
iR3570 / iR4570 / iR3530
[4]
[2]
[1]
F-8-314
Chapter 8
0007-6675
[3]
[3]
[3]
0007-6676
8-123