Mounting The Main Thermistor; Sub Thermistor; Removing The Sub Thermistor - Canon ImageRunner iR8500 Series Service Manual

[1]
When shifting the thermistor assembly to the rear, take care not to
damage the fixing roller with the thermistor.
5) Remove the 2 thermistor retaining springs [1], and detach the main
thermistor [2].
[1]
10.5.6.2 Removing the Main Thermistor
/ iR85+ / iR8070
1) Remove the fixing assembly.
2) Remove the fixing web and the oil pan.
3) Remove the fixing harness cover.
4) Disconnect the connector [1] of the thermistor. Remove the screw [2],
and shift the thermistor assembly [3] to the rear to detach.
When shifting the thermistor assembly to the rear, take care not to
damage the fixing roller with the thermistor.
[1]
5) Remove the 2 thermistor retaining springs [1], and detach the main
[2]
[3]
F-10-62
[2] [1]
F-10-63
0008-8197
[2]
[3]
F-10-64
thermistor [2].
[1]

10.5.6.3 Mounting the Main Thermistor

iR105i/iR105+ / iR9070
When mounting the main thermistor to the fixing assembly, be sure that
the tie-wrap [1] is as shown.
The tie-wrap serves as a stopper by butting against the claw [2].
Check also to be sure that the main thermistor and the fixing roller are
not away from each other.
[2] [1]

10.5.6.4 Mounting the Main Thermistor

/ iR85+ / iR8070
When mounting the main thermistor to the fixing assembly, be sure that
the tie-wrap [1] is as shown.
The tie-wrap serves as a stopper by butting against the claw [2].
Check also to be sure that the main thermistor and the fixing roller are
not away from each other.
[2] [1]

10.5.7 Sub Thermistor

10.5.7.1 Removing the Sub Thermistor

iR105i/iR105+ / iR9070
1) Slide out the fixing assembly.
2) Remove the fixing web and the oil pan.
3) Remove the fixing harness cover.
4) Disconnect the connector [1] and remove the screw [2]; then, detach
the sub thermistor assembly [3].
Chapter 10
[2]
[1]
F-10-65
0007-2914
F-10-66
0008-8198
F-10-67
0007-2915
10-27