Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 232

show spantree ports
1 1/6
1 1/7
1 1/8
1 1/9
1 1/10
1 1/11
1 1/12
-> spantree protocol mstp
-> show spantree ports
Msti Port Oper Status
-----+-----+------------+---------+-------
0 1/1
0 1/2
0 1/3
0 1/4
0 1/5
0 1/6
0 1/7
0 1/8
0 1/9
0 1/10
0 1/11
0 1/12
-> spantree mode per-vlan
-> show spantree ports
Vlan Port Oper Status
-----+-----+------------+---------+-------+---------
1 1/1
1 1/2
1 1/3
1 1/4
1 1/5
1 1/6
1 1/7
1 1/8
1 1/9
output definitions
Bridge, Msti, or Vlan
Port
Oper Status
page 5-90
DIS 0 DIS
DIS 0 DIS
DIS 0 DIS
DIS 0 DIS
DIS 0 DIS
DIS 0 DIS
DIS 0 DIS
Path Cost Role
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
Path Cost Role
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
DIS 0
The CIST instance, referred to as bridge 1 when either STP (802.1D) or
RSTP (802.1W) is the active protocol in the flat mode. The MSTI num-
ber when MSTP is the active protocol in the flat mode. The VLAN ID
number when STP or RSTP is the active protocol in the per-VLAN
mode.
The slot number for the module and the physical port number or a
logical port. If the slot number is 0, then the port number refers to a link
aggregate logical port number (for example, 0/31).
The port operational state as defined by application of the Spanning
Tree Protocol. Possible port operational states include: disabled, block-
ing, learning, and forwarding.
Distributed Spanning Tree Commands
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
Notes
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DIS
DI
OmniSwitch CLI Reference Guide March 2011