Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 248

show spantree vlan ports
output definitions (continued)
Man. Mode
Config Cost
Adm Cnx
Adm Edg
Aut Edg
Rstr Tcn
Rstr Role/Root Guard
PVST+ Cfg
PVST+ Stat
Release History
Release 7.1.1; command was introduced.
page 5-106
The manual mode setting for the port: yes indicates that the blocking or
forwarding state of the port was manually set and the port does not par-
ticipate in the Spanning Tree Algorithm; no indicates that the Spanning
Tree Algorithm is managing the port state. Configured through the
spantree vlan mode command.
The configured path cost value for this port. Configured through the
spantree vlan path-cost
The administrative connection type: PTP, NPT, or AUT. Configured
through the spantree vlan path-cost
The edge port administrative status: yes indicates that the port is an
admin edge port; no indicates that the port is not an admin edge port.
Configured through the spantree vlan connection
The edge port automatic status: yes indicates that the port is an auto-
matic edge port; no indicates that the port is not an automatic edge port.
Configured through the spantree cist auto-edge
auto-edge command.
The restricted TCN capability: yes indicates that the port supports the
restricted TCN capability; no indicates that the port does not support
the restricted TCN capability. Configured through the
restricted-tcn or spantree vlan restricted-tcn
The restricted status of the port: Yes indicates that the port is restricted
from becoming the root; No indicates that the port is not restricted from
becoming the root. Configured through the
role or spantree vlan restricted-role
The type of BPDU used on the port: AUTO indicates that IEEE
BPDUs are used until a PVST+ BPDU is detected; ENA indicates
that PVST+ BPDUs are used; DIS indicates that IEEE BPDUs are
used. Configured through the
Indicates whether or not the PVST+ interoperability status is enabled
(ENA) or disabled (DIS) for the port. Configured through the
pvst+compatibility command.
Distributed Spanning Tree Commands
command.
command.
or
command.
spantree cist restricted-
command.
spantree pvst+compatibility
OmniSwitch CLI Reference Guide
command.
spantree vlan
spantree cist
command.
spantree
March 2011