Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 242

show spantree msti ports
output definitions (continued)
Aut Edg
Rstr Tcn
Rstr Role
Release History
Release 7.1.1; command introduced.
Related Commands
show spantree ports
show spantree cist ports
show spantree vlan ports
page 5-100
The edge port automatic status: yes indicates that the port is an auto-
matic edge port; no indicates that the port is not an automatic edge port.
Configured through the
auto-edge command.
The restricted TCN capability: yes indicates that the port supports the
restricted TCN capability; no indicates that the port does not support
the restricted TCN capability. Configured through the
restricted-tcn or spantree vlan restricted-tcn
The restricted role port status: yes indicates that the port is a restricted
role port; no indicates that the port is not a restricted role port. Config-
ured through the spantree cist restricted-role
restricted-role command.
Displays Spanning Tree port information for the flat mode CIST
instance or a per-VLAN mode VLAN instance.
Displays Spanning Tree port information for a CIST instance when
the switch is operating in the per-VLAN or flat Spanning Tree
mode.
Displays Spanning Tree port information for a VLAN when the
switch is operating in the per-VLAN or flat Spanning Tree mode.
Distributed Spanning Tree Commands
spantree cist auto-edge
command.
or
OmniSwitch CLI Reference Guide
or spantree vlan
spantree cist
spantree vlan
March 2011