Using HP Instrument BASIC
Listing a Program (LIST)
Listing a Program (LIST)
You can output a program listing either on the screen or to the printer.
Displaying a program listing on the screen
You output a program listing on the screen as described below.
Step 1. Since a program listing is output on the BASIC area of the 4294A's LCD screen, you need
to reserve the BASIC area before outputting a listing. For the procedure, see "Reserving an
Area for BASIC on the Screen" on page 139.
Step 2. Type LIST on the keyboard, then press the
Outputting a program listing to the printer
NOTE
Check that the printer is connected to the 4294A.
Step 1. Type PRINTER IS PRT on the keyboard, then press the
the printer.
Step 2. Further, type LIST on the keyboard, and press the
will be output to the printer.
Step 3. Type PRINTER IS CRT on the keyboard, then press the
destination back to the 4294A's LCD screen.
144
[Enter]
key.
[Enter]
key to route the output to
[Enter]
key. Then the program listing
key to switch the output
[Enter]
Chapter 11