Savdsta; Savdtif - Agilent Technologies 4294A Programming Manual

SAVDSTA

Syntax SAVDSTA <string>
Description
Saves the instrument setting state, calibration data array, compensation data array, and
memory array (refer to "Internal data arrays" on page 81) into the specified file.
Regardless of the settings with the "SAVCAL"(416page), "SAVDAT"(417page),
"SAVDTRC"(420page), "SAVMEM"(420page) and "SAVMTRC"(421page) commands,
the arrays are saved. When specifying a file, you can use a file name including its extension
(refer to Table 8-1 on page 113) or a file name whose extension is omitted. If the extension
is not specified, the file name is the specified file name with the ".STA" extension added.
(No query)
Parameters
Description
Range
If the specified file name has characters that exceed the maximum length, only the string of
up to the maximum length is valid and the remaining characters are ignored.
Corresponding
[Save]
key

SAVDTIF

Syntax SAVDTIF <string>
Description
Saves image on the LCD screen into the specified file in the TIF format. When specifying
a file, you can use a file name including its extension (refer to Table 8-1 on page 113) or a
file name whose extension is omitted. If the extension is not specified, the file name is the
specified file name with the ".TIF" extension added.(No query)
Parameters
Description
Range
If the specified file name has characters that exceed the maximum length, only the string of
up to the maximum length is valid and the remaining characters are ignored.
Corresponding
[Save]
key
Chapter 16
Save file name
When the extension is not specified: 8 characters or less
When the extension is specified: 12 characters or less
STATE 
-
Save file name
When the extension is not specified: 8 characters or less
When the extension is specified: 12 characters or less
- GRAPHICS 
GPIB Command Reference
SAVDSTA
<string>
<string>
419