Printing onto a Printer Directly Connected to Agilent 4294A
How to print screen
Set the LCD screen as you desired then use the command below to start printing.
•
"PRINALL" on page 405
Use the command below to abort your printing.
•
"COPA" on page 282
The following items can be set for the printing.
Item
Printing resolution (DPI)
Form feed
Media orientation
(Portrait/Landscape)
Left margin
Top margin
Softkey labels
Time and date
Colors
Settings for the above items are stored in the non-volatile memory (SRAM), thus they do
not revert to the initial settings by executing "PRES" command on page 404. Use the
command below to restore the initial settings.
•
"DFLT" on page 297
Chapter 14
Command
"DPI" on page 308
"FORMFEED" on page 317
"LANDSCAPE" on page 324
"LMARG" on page 342
"TMARG" on page 455
"PRSOFT" on page 405
"COPT" on page 283
"PRIC" on page 405
Using Printer
Initial settings [Unit]
75 [DPI]
Yes
Portrait
1 [inch]
1 [inch]
Not printed
Not printed
Black and white
249