GPIB Command Reference
OUT2{H|L}
OUT2{H|L}
Syntax
OUT2{H|L}
Description
Sets the OUTPUT2 of the 24-bit I/O port to HIGH (or LOW). (No query)
Corresponding
No front panel key is available to execute this function.
key
OUT2ENV{H|L}
Syntax
OUT2ENV{H|L}
OUT2ENV{H|L}?
Description
Makes the setting so that OUTPUT2 goes to HIGH (or LOW) when a pulse is inputted to
INPUT1 of the 24-bit I/O port.
Corresponding
No front panel key is available to execute this function.
key
OUT8IO
Syntax
OUT8IO <numeric>
Description
Outputs data to OUT0 to OUT7 of the 8-bit I/O port. Data is outputted as 8-bit binary,
assuming that OUT0 is LSB and OUT7 is MSB. This command has the same function as
the WRITEIO 15,0 command of Instrument BASIC. (Query only)
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Corresponding
No front panel key is available to execute this function.
key
368
Description
Output data
Range
0 to 255
Resolution
1
<numeric>
Chapter 16