Chad; Cin - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

CHAD

CHAD
Syntax
CHAD <string>
Description Change the current directory under which file operation is performed. To change it to a
directory in a different mass storage, use the "STOD" command on page 445 to change the
file operation target mass storage, and then execute this command. (No query)
Parameters
Use ".." (2 periods) as the directory name to move to the one-level upper directory.
Corresponding
[Save]
key

CIN

Syntax
CIN
CIN?
Description
Sets the input/output direction of port C of the 24-bit I/O port to input (preset state).
To change the input/output direction of port C to output, use the "COUT" command on
page 283.
Query response
{1|0}<newline><^END>
Corresponding
No front panel key is available to execute this function.
key
278
Description Change destination directory name
Range 8 characters or less
- -
FILE UTILITIES
1 Input is selected as the input/output direction of port C.
0 Output is selected as the input/output direction of port C.
<string>
CHANGE DIRECTORY 
Description
Chapter 16