Processing Measurement Results
Analyzing Measurement Results
Analyzing Measurement Results
Equivalent circuit analysis
With the Agilent 4294A, five different circuit models are available for equivalent circuit
analysis as shown below depending on the type of measurement results obtained.
Use the following command to select the desired circuit model.
•
Use the following command to perform equivalent circuit analysis.
•
NOTE
The applicable range for equivalent circuit analysis is the same as the range searched by the
marker.
100
Equivalent Circuit Analysis Model
A
B
C
D
E
*1.Measurement parameter: |Z|-θ, Vertical display format: logged |Z| and linear θ
"EQUC" on page 311
"CALECPARA" on page 275
Sample Types
Typical Frequency Characteristics
Inductor
with Large
Core Loss
Inductor and
Resistor
Resistor with
Large
Resistance
Capacitor
Oscillator and
Vibrator
*1
Chapter 7