Swpp; Swpt - Agilent Technologies 4294A Programming Manual

SWPP

Syntax SWPP {FREQ|OLEV|DCB}
SWPP?
Description Sets the sweep parameter.
Parameters
FREQ (initial value)
OLEV
DCB
Query response
{FREQ|OLEV|DCB}<newline><^END>
Corresponding
[Sweep]
key

SWPT

Syntax
SWPT {LIN|LOG|LIST}
SWPT?
Description
Sets the sweep type.
Parameters
LIN (initial value)
LOG
LIST
Query response {LIN|LOG|LIST}<newline><^END>
Corresponding
[Sweep]
key
Chapter 16
Specifies the frequency sweep.
Specifies the oscillator (OSC) level sweep.
Specifies the dc bias level sweep.
- - {
PARAMETER [ ] FREQ
Specifies the linear sweep.
Specifies the log sweep (settable only for frequency sweep).
Specifies the list sweep.
- TYPE [ ] - { LINEAR | LOG
GPIB Command Reference
Description
| | }
OSC LEVEL DC BIAS
Description
| LIST }
SWPP
449