Meastat - Agilent Technologies 4294A Programming Manual

Corresponding
[Meas]
key
[Meas]
[Meas]
[Meas]

MEASTAT

Syntax MEASTAT {ON|OFF|1|0}
MEASTAT?
Description For the active trace (set with the "TRAC" command on page 457), determines whether to,
after the completion of each sweep, calculate the statistics (mean value, standard deviation,
and difference value between the maximum value and the minimum value), of the search
range in the trace selected as the marker use target trace (set with the "MKRO" command
on page 356) and display the result on the screen.
Parameters
ON or 1
OFF or 0 (initial value)
Query response
{1|0}<newline><^END>
Corresponding
[Utility]
key
Chapter 16
- { | | |
|Z|-θ R - X Ls - Rs Ls - Q
- - { | |
more 1/3 |Y|-θ G - B Lp - G
- more 1/3 - more 2/3 - { COMPLEX Z-Y
- more 1/3 - more 2/3 - other
Enables the statistics display.
Disables the statistics display.
- STATISTICS on OFF
GPIB Command Reference
| | | }
Cs - Rs Cs - Q Cs - D
| | |
Lp - Q Cp - G Cp - Q
| |Z| - Ls | |Z| - Cs
- { |Z| - Rs | |Z| - Q | |Z| - D | Lp - Rp
Description
MEASTAT
| }
Cp - D
| |Z| - Lp | |Z| - Cs }
| Cp - Rp }
349