CWFREQ
Syntax
CWFREQ <numeric>[HZ|MHZ]
CWFREQ?
Description
Sets the frequency of the oscillator for the oscillator (OSC) level sweep and dc bias level
sweep.
Parameters
Description
Range
Initial value
Unit
Resolution
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response
{numeric}<newline><^END>
Corresponding
[Source]
key
DATMEM
Syntax
DATMEM
Description
Copies the measured data into the memory array. It is copied to both the A and B
traces.(No query)
Corresponding
[Display]
key
Chapter 16
Frequency of the oscillator
40 to 110E6
1E6
Hz
1E-3
-
FREQUENCY
DATA → MEMORY
-
DEF TRACR[ ]
-
GPIB Command Reference
<numeric>
CWFREQ
285