Trgs; Uskey - Agilent Technologies 4294A Programming Manual

TRGS

Syntax TRGS {INT|EXT|BUS|MAN}
TRGS?
Description Selects a trigger source.
Parameters
INT (initial value)
EXT
BUS
MAN
Query response {INT|EXT|BUS|MAN}<newline><^END>
Corresponding
[Trigger]
key

USKEY

Syntax USKEY
Description Displays user keys (ON KEY LABELS) of Instrument BAISC. (No query)
Corresponding
[System]
key
Chapter 16
Specifies the internal trigger.
Specifies the external trigger inputted from the EXT TRIGGER
terminal on the rear panel.
Specifies the GPIB/LAN trigger (trigger by executing the "*TRG"
command on page 261).
Specifies the manual trigger (trigger by the following key sequence
on the front panel:
- SOURCE [ ] -{ FREE RUN
- IBASIC - ON KEY LABELS
GPIB Command Reference
Description
[Trigger] - SOURCE [ ] -
| EXTERNAL | HP-IB/LAN |
TRGS
MANUAL ).
MANUAL }
459