Trgeve; Trgp - Agilent Technologies 4294A Programming Manual

GPIB Command Reference

TRGEVE

TRGEVE
Syntax
TRGEVE {SWE|POIN}
TRGEVE?
Description
Sets the mode of trigger events.
Parameters
Query response
{SWE|POIN}<newline><^END>
Corresponding
[Trigger]
key

TRGP

Syntax
TRGP {POS|NEG}
TRGP?
Description
Sets the polarity of the external trigger signal inputted from the EXT TRIGGER terminal
on the rear panel.
Parameters
Query response
{POS|NEG}<newline><^END>
Corresponding
[Trigger]
key
458
SWE (initial value) Specifies the mode in which each trigger performs a single sweep
(if the averaging function is on, a set number of times as the
averaging count).
POIN Specifies the mode in which each trigger performs the
measurement of a single measurement point.
- -
SOURCE [ ] EVENT [ ]
POS (initial value) Specifies positive (generating a trigger at a rise from the LOW
level to the HIGH level).
NEG Specifies negative (generating a trigger at a fall from the HIGH
level to the LOW level).
- SOURCE [ ] - EXT POLRTY [ ]
Description
Description
Chapter 16