Running The Program - Agilent Technologies 4294A Programming Manual

Remote Control, Overview
The Basics of Writing/Running Programs
Step 10. Enter the END command to quit the program.
[System]
10 ASSIGN @Hp4294 TO 800
20 OUTPUT @Hp4294;";PRES"
30 OUTPUT @Hp4294;";MEAS CSR"
40 OUTPUT @Hp4294;";CENT 70E6;SPAN 100E3"
50 OUTPUT @Hp4294;";AUTO"
60 END
70 _
Step 11. Press the following soft key to exit edit mode.
done
The measurement screen returns.
NOTE
In certain cases, some operations to handle user calibration or other tasks cannot be
properly programmed.

Running the program

Press the following key and soft keys to run the program.
[System]
The System runs the program. You can also run the program by typing as below.
RUN
32
- - -
IBASIC END [×1]
-
IBASIC - Run
[Enter]
Chapter 2