Dcv; Defc - Agilent Technologies 4294A Programming Manual

DCV

Syntax DCV <numeric>[V]
DCV?
Description Sets the dc bias output level when the dc bias output mode is the voltage mode or
constant-voltage mode. To set the dc bias output level of each segment when creating the
list sweep table, also use this command.
Parameters
Description
Range
Initial value
Unit
Resolution
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response
{numeric}<newline><^END>
Corresponding
[Source]
key

DEFC

Syntax
DEFC
Description
Returns all display color settings to the factory states. (No query)
Corresponding
[Display]
key
Chapter 16
Output voltage value of the dc bias
-40 to 40
0 (Note that the initial value is the current set value of the dc bias
output voltage when creating segment 1; the set value of the
previous segment, when creating an additional segment.)
V (volt)
1E-3
- -
BIAS MENU VOLTAGE LEVEL
- -
more 1/2 MODIFY COLOR
GPIB Command Reference
<numeric>
-
DEFAULT COLORS
DCV
295