Lispan; Lisv - Agilent Technologies 4294A Programming Manual

LISPAN

Syntax LISPAN {SINGLE|SEGMENT}
LISPAN?
Description Sets the display of the frequency span at list sweep: using the range from the minimum
value to the maximum value in all segments (single span), or using segment-by-segment
allocation.
Parameters
SINGLE
(initial value)
SEGMENT
Query response
{SINGLE|SEGMENT}<newline><^END>
Corresponding
[Sweep]
key

LISV

Syntax LISV
Description
Displays the tabular list of all measurement points and measured values at each
measurement point. Each measured value is updated each time a sweep is completed. To
return to the normal measurement screen, execute the "RESD" command on page 411. (No
query)
Corresponding
[Copy]
key
Chapter 16
Specifies the single span display as the display method of the
frequency span.
Specifies the segment-by-segment display as the display method of
the frequency span.
-
LIST SPAN [ ]
- - LIST VALUE 
SELECT CONTENTS
GPIB Command Reference
Description
LISPAN
341