Setting The Lcd Screen; Setting Colors For Images On The Lcd Screen; Setting Overall Condition For The Lcd Screen; Restoring Factory Setting - Agilent Technologies 4294A Programming Manual

Setting the Display (LCD)

Setting the LCD Screen

Setting the LCD Screen

Setting colors for images on the LCD screen

Colors can be separately specified for the following images on the LCD screen.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
NOTE When performing list sweep, one of the colors for the Instrument BASIC pens 1 to 6 will
be assigned to a trace of each segment.
Use the command below to select an item for setting out of those listed above.
•
Use the commands below to assign a color to the selected item with the above command.
•
•
•

Setting overall condition for the LCD screen

Use the command below to specify brightness of the LCD screen.
•
Use the command below to specify brightness of the background of the LCD screen.
•

Restoring factory setting

Use the command below to restore the factory settings for coloring all of the items on the
screen.
•
Use the command below to restore the factory setting for coloring of the item selected with
"COLO"command.
•
252
Trace A (data trace type)
Trace A (memory trace type)
Trace B (data trace type)
Trace B (memory trace type)
Grid and part of softkey labels
Text strings for warning notification
Text strings other than measurement values and warning notification
Text strings for Instrument BASIC.
Pen 1 strings for Instrument BASIC.
Pen 2 strings for Instrument BASIC.
Pen 3 strings for Instrument BASIC.
Pen 4 strings for Instrument BASIC.
Pen 5 strings for Instrument BASIC.
Pen 6 strings for Instrument BASIC.
"COLO" on page 280
"CBRI" on page 276
"COLOR" on page 281
"TINT" on page 454
"INTE" on page 322
"BACI" on page 270
"DEFC" on page 295
"RSCO" on page 414
Chapter 15